危废填埋场地下水环境影响评价研究

危险废物具有各种危害性,不仅对人体健康有着威胁,对于环境治理来说也有着极大的消极影响。就目前来说,虽然安全填埋技术已经较为成熟,但在实际实施过程中还是容易出现渗漏事故,渗漏液在地下容易穿透防渗层,从而影响地下水,所以这也是我们需要重视的问题之一。     

Facile high yield synthesis of MgCo2O4 and investigation of its role as anode material for lithium ion batteries

In this article, we have reported a one-step scalable synthesis of MgCo₂O₄ nanostructures as efficient anode material for Li-ion batteries and investigated the role of post-synthesis calcination temperature (400, 600 and 800 °C) on its physiochemical properties and electrochemical performances. The XRD pattern of the calcinated sample at 400 °C (MC 400) indicates a pure phase of MgCo₂O₄. However, on increasing the calcination temperature to 600 °C (MC 600), an additional phase corresponding to MgO was detected and the corresponding XRD peak intensity further increased on increasing the calcination temperature to 800 °C (MC 800 °C). This was accompanied by a morphological transformation from flake and rod-like nanostructures, to an agglomerated dense flake-like morphology. Electrochemical studies revealed that the calcination temperature plays an important role in determining the electrochemical performance of the MgCo₂O₄ as anode material. In a half cell, the MC 600 showed the best electrochemical performance with high discharge capacity of 980 mA h g⁻¹ (2nd discharge at 60 mA g⁻¹) and a reversible discharge capacity of 886 mA h g⁻¹ at the end of 50 cycles with high coulombic efficiency of 98%. Long term stability was carried out at 0.5C which showed a capacity retention of 358 mA h g⁻¹ at the end of 500 cycles. The superior electrochemical performance of the MC600 can be attributed to the presence of the small amount of MgO, which is believed to provide the anode materials better structural stability during cycling. The claim was further supported by ex-situ TEM analysis of the anode material of a cycled cell (50 cycles).     

Spreading and Curing Behaviors of a Thermosetting Droplet-Silicone on a Heated Surface

Thermosetting materials are widely used as encapsulation in the electrical packaging to protect the core electronic components from external force, moisture, dust, and other factors. However, the spreading and curing behaviors of such kind of fluid on a heated surface have been rarely explored. In this study, we experimentally and numerically investigated the spreading and curing behaviors of the silicone(OE6550 A/B, which is widely used in the light-emitting diode packaging) droplet with diameter of ～2.2 mm on a heated surface with temperature ranging from 25 ℃ to 250 ℃. For the experiments, we established a setup with high-speed camera and heating unit to capture the fast spreading process of the silicone droplet on the heated surface. For the numerical simulation, we built a viscosity model of the silicone by using the Kiuna's model and combined the viscosity model with the Volume of Fluid(VOF) model by the User Defined Function(UDF) method. The results show that the surface temperature significantly affected the spreading behaviors of the silicone droplet since it determines the temperature and viscosity distribution inside the droplet. For surface temperature varied from 25 ℃ to 250 ℃, the final contact radius changed from ～2.95 mm to ～1.78 mm and the total spreading time changed from ～511 s to ～0.15 s. By further analyzing the viscosity evolution of the droplet, we found that the decreasing of the total spreading time was caused by the decrease of the viscosity under high surface temperature at initial spreading stage, while the reduction of the final contact radius was caused by the curing of the precursor film. This study supplies a strategy to tuning the spreading and curing behavior of silicone by imposing high surface temperature, which is of great importance to the electronic packaging.     

Laser-assisted preparation of monolithic acidic catalysts for biomass conversion

5-(Hydroxymethyl)furfural (5-HMF) is a vital platform molecule from which a variety of high-value-added fine chemicals and polymerizable monomers can be prepared. The use of solid acids to catalyze the conversion of biomass into 5-HMF is environmentally friendly and economical. However, exploiting the high yield of 5-HMF in a highly concentrated reactant system is challenging. Herein, we present a laser-assisted method for preparing highly acidic monolithic acidic catalysts. A monolithic acidic catalyst based on metal Zr sheets was synthesized and used to catalytically convert 30 wt% fructose into 5-HMF (conversion rate: 96%; yield: 95%). The catalyst was immediately separated from the reaction solution by direct removal at the end of the reaction. Catalytic efficiency was largely unaffected after 10 cycles of use, and the same catalytic efficiency was observed after laser-regeneration, highlighting the potential industrial applicability of the developed catalyst.     

立井过砂岩富含水层工作面预注浆分析

郑煤集团杨河煤业43采区樊寨副立井施工中需要穿过预计涌水量187 m³/h、厚57 m的砂岩含水层。针对第1回次采用普通水泥工作面预注浆、吸浆量少、升压快、效果差、达不到预期目的等不利情况，在后3回次采用大压力，白银水泥、超细水泥等新材料、单孔上下端正反同时注浆新工艺，采用压注清水、水玻璃，利用水玻璃的黏性，反复冲洗钻孔把细小裂隙中锈蚀颗粒带出，打开注浆通道，同时针对竖向裂隙多、横向裂隙不联系，加密钻孔布置，缩小注浆段高，取得了较好的注浆效果。     

明代盔甲种类及制作工艺研究

本文通过盔甲的制作及材料,区分了非金属材料的皮甲、瓠子作甲、藤甲、绵甲、纸甲以及金属材料组成的齐腰甲、齐腰明甲、缉甲、布甲、铁甲、钢甲、铜甲、锡甲等类型,并对其制作方式等进行分析。结合不同材质盔甲的使用地区、战争方式进行研究,以对明代盔甲有一个整体性的认知。     

Hydroxyapatite cages with aligned pores for bone grafting – Seeding of human osteoblast-like cells in vitro and their response in dynamic culture mode

Hydroxyapatite (HA) is a highly regarded synthetic bone graft material. Porous HA ceramics blocks are used to substitute harvested natural bone grafts. Being similar to bone mineral, HA material integrates with the host bone through surface osteointegration and slowly resorb along with the natural bone remodeling process. The blocks in use currently have random and tortuous pore structures. The present work explores the usefulness of cage-like HA ceramic design with end-to-end open pores, with the help of in vitro cell culture methods. Such a structure, on implantation, will take up the blood factors and cells and host the bone remodeling process inside the bulk of the cage, leading to early healing. In the study, HA samples with aligned through-pores were prepared and explored in vitro, with a focus on how the pores host the cells inside and to what level the cells maintain their activity. Human osteoblast-like cells (HOS) were used, at different seeding and culturing approaches. Cell seeding was done through (i) conventional large volume cell suspension, (ii) a confined mini chamber with a limited volume of cell suspension, and (iii) placing a concentrated drop of cell suspension directly on top of the scaffold. The third approach gave the best cell adhesion and proliferation, and hence used for further explorations. A dynamic culture system was designed in-house by bifurcating the cell culture wells using vertical inserts, holding the samples horizontally with their ends open to both sides, and making the media flow across using a rocker platform. The HOS cell adhesion, viability and proliferation were tested in the HA cages, in static and dynamic culture conditions, with conventional porous ceramics as the control. The cell infiltration was deeper and the cell viability over a period of 7 days was significantly higher in dynamic culture conditions in the test samples.     

Aqueous dispersion of 1D van der Waals Mo6S3I6 crystal using biocompatible tri-block copolymer

To achieve the stable dispersion of 1D van der Waals crystal Mo₆S₃I₆ in aqueous media, the tri-block copolymer (Poloxamer) is used as dispersant. The head group of Poloxamer, hydrophobic polypropylene oxide parts can be adsorbed to Mo₆S₃I₆ surface by hydrophobic interaction and the tail group with hydrophilic polyethylene oxide exposed to the outside of the Mo₆S₃I₆ is soluble in water and can form sufficient steric hindrance, resulting in stable aqueous dispersion in nm scale. The excellent biocompatibility of aqueous dispersed nm scale 1D Mo₆S₃I₆ was demonstrated by effective proliferation of C2C12 cells.     

中国抗中子辐照钢的抗辐照设计与验证

聚变堆等未来先进核能系统要求材料在强流高能中子辐照下长期保持良好的结构稳定性和机械性能。为适应未来先进核能技术发展的需要，中国科学院核能安全技术研究所•凤麟团队牵头研发了具有我国自主知识产权的中国抗中子辐照钢--CLAM钢。CLAM钢的设计考虑了未来核能清洁性的要求，以及苛刻服役环境中材料抗辐照、耐高温、耐腐蚀等性能要求。通过中子学计算分析设计了低活化成分范围，基于选择性纳米相析出进行了抗辐照、耐高温性能优化设计。针对材料的抗辐照性能，利用国内外中子、离子、电子及等离子体辐照设施开展了系列辐照考验研究，通过多角度表征辐照前后材料的微观结构和宏观性能，综合评估了材料的辐照性能，并与国际上同类材料在相近或相同条件下的辐照性能进行了对比分析，结果表明CLAM钢具有良好的抗辐照性能。